Alpine Exteriors is a siding company serving New Port Richey and the surrounding Pasco County communities. We made a deliberate decision years ago to install one type of siding, and one type only: James Hardie fiber cement. We don't quote vinyl, we don't quote LP SmartSide or other engineered wood products, and we won't try to talk you into one just to win a bid. That's not a marketing angle — it's how we run the business. When a crew only ever installs one system, they get genuinely good at it, and you don't end up as the job where they're "figuring it out" on your house.
New Port Richey sits along the Pithlachascotee River with quick access to the Gulf, and homes here range from older canal-front cottages near Sims Park and downtown to newer construction further inland toward Little Road and US-19. Whether your siding is going to face salt air off the water or humidity and pop-up storms further from the coast, the product needs to hold up to Gulf Coast conditions year-round — and that's the whole reason fiber cement is the only thing we put on a house.
This is a professional standard we hold ourselves to, not a knock on every other product on the market. Here's our reasoning, plain and simple:
We're not going to tell you a competing product is garbage — plenty of siding companies do good work with other materials. We just don't, and we'd rather be upfront about that before you call us out for an estimate.
Every siding job follows the same disciplined sequence, whether it's a small addition or a full re-side of an older New Port Richey home.
We walk the exterior with you, look at the current siding or sheathing condition, check for moisture damage or soft spots (common on older homes near the river and canals), and talk through style, color, and profile options — lap siding, shingle-style panels, or board and batten.
You get a clear, itemized quote — material, labor, trim work, and any repair or sheathing replacement that's needed underneath. No vague allowances, no surprise change orders sprung on you mid-job.
Before a single piece of Hardie board goes up, we address what's underneath — damaged sheathing, old flashing, or areas where water has been getting in. Fiber cement only performs as well as the surface it's fastened to.
Proper house wrap and flashing at windows, doors, and penetrations is where most long-term siding failures actually start (with any material). We follow James Hardie's installation specifications closely here, not shortcuts.
Panels or lap boards go up with correct fastener spacing, clearances from grade and roof lines, and factory-recommended overlaps. This step is what protects your Hardie warranty, so we don't rush it.
Joints are sealed, trim is finished out, and the surface is left ready for finish paint (factory-primed or ColorPlus prefinished, depending on what you choose).
We walk the finished exterior with you before we consider the job done — not before.
Most single-family siding projects in the New Port Richey area run anywhere from a few days to two to three weeks depending on the size of the home, whether there's underlying repair work, and weather. Florida's summer storm pattern can push a schedule around — we build reasonable weather buffers into our timelines rather than promising a date we can't control.
| Project Type | Typical Duration | Common Factors |
|---|---|---|
| Partial re-side / accent areas | 2-4 days | Minimal prep, limited scope |
| Full single-story home | 1-2 weeks | Sheathing condition, trim detail, weather |
| Full two-story or larger home | 2-3 weeks | Access/scaffolding, size, repair scope |
| Storm or moisture damage repair + re-side | Varies | Extent of underlying damage found during tear-off |
We work throughout New Port Richey and nearby Pasco County communities, including Trinity, Port Richey, Holiday, Elfers, and neighborhoods along US-19 and the SR 54 corridor. We're familiar with the mix of housing stock here — from older concrete block homes with wood-trimmed gables near downtown to newer stucco-and-frame construction in the subdivisions further east. That range matters, because the right fiber cement profile and installation approach can differ depending on the home's age, construction type, and how exposed it is to wind and moisture.
Homes closer to the Gulf and the Pithlachascotee River deal with more salt air and humidity, which affects fastener choice and how aggressively we recommend sealing joints and trim. Inland homes deal less with salt but still face the same heavy summer rain and UV exposure. We adjust our approach house by house rather than treating every job the same.
Pasco County sits squarely in Florida's hurricane corridor, and June through November is always on our minds when we're scheduling and installing. James Hardie siding is manufactured and tested to hold up against wind-driven rain and high winds, but performance in a storm comes down to installation quality just as much as the product itself. Correct fastening patterns, proper flashing, and sealed joints are what actually keep wind-driven rain from getting behind the siding during a tropical system — not just the material rating on the box.
If your home took on damage from a prior storm, or you're planning ahead of hurricane season rather than after one, we're glad to assess your current siding and flag anything that's a liability before the next storm rolls through.
James Hardie provides a manufacturer's product warranty on their fiber cement siding, and we back our installation work with our own workmanship warranty. The two work together — the manufacturer stands behind the material, we stand behind how it was put on your house. If something is ever installed incorrectly on our end, that's on us to fix, not something you should have to chase down. We'll walk you through the specific warranty terms and coverage period during your estimate, since they can vary by product line.
If you're weighing siding options for a home in New Port Richey, Trinity, Port Richey, or anywhere nearby in Pasco County, we're happy to come take a look and give you a straight, no-pressure estimate. You'll get an honest answer about condition, scope, and cost — and if James Hardie fiber cement isn't the right fit for your budget or project, we'll tell you that too rather than push a sale. Fill out the form below to get started.
We chose to specialize in one system so our crews install it correctly every time, rather than spreading expertise across several products. For Gulf Coast humidity, heat, and storm exposure, we believe fiber cement is the more durable long-term choice, and it's the only siding we stand fully behind.
Ask for their Florida license number and verify it's active with the state, get a written itemized estimate rather than a verbal number, and ask who handles warranty issues after the job is done. A contractor who's vague on any of these is worth a second look before you sign anything.
Primed siding is ready for you to paint after installation and gives you full color flexibility down the road. ColorPlus is factory-finished with a baked-on coating designed to resist fading longer than field-applied paint, but the color selection is limited to Hardie's ColorPlus palette.
Yes — homes closer to the Gulf and the Pithlachascotee River deal with more salt air and humidity, which we account for with fastener choices and how thoroughly we seal joints and trim. Inland homes in Pasco County face less salt exposure but still need the same attention to sealing against heavy summer rain.
Properly installed fiber cement siding is engineered to resist wind-driven rain and high winds, but the installation quality matters as much as the product itself. Correct fastening, flashing, and sealed joints are what actually keep water from getting behind the siding during a storm.