Homeowners in Dupree Lakes often start their siding search the same way: a few keyword searches, a stack of contractor names, and no easy way to tell who actually knows what they're doing versus who's just quoting a job. Alpine Exteriors takes a narrower approach than most of the contractors you'll find. We install James Hardie fiber cement siding exclusively — no vinyl, no LP SmartSide, no engineered wood alternatives. That's not a marketing angle. It's a decision about what we're willing to put our license and our name behind in the Plant City area's climate, and it shapes everything from how we quote a job to how we train our crews.
This page is about who we are as a siding contractor and what working with us actually looks like — our process, our warranty structure, our service area around Dupree Lakes, and what to expect from first call to final walkthrough. If you're comparing siding materials in general, that's a different conversation. This one is about the contractor relationship itself.
Every fiber cement, vinyl, and composite siding product has trade-offs. We've made a professional judgment call to standardize on James Hardie for every siding job we take on, for a few concrete reasons that matter in inland Hillsborough County:
We don't say this to disparage other products — plenty of homeowners have vinyl or engineered wood siding that's holding up fine. It's simply not what we choose to stand behind as a company, so we don't offer it.
Every job starts with a walk-around of the home — not a drive-by estimate. We look at the current siding condition, the state of the sheathing underneath where accessible, trim and soffit condition, drainage patterns around the foundation, and any areas where past water intrusion has left marks. Dupree Lakes homes vary in age and construction style, so we don't quote from a generic template.
We measure the full exterior, account for openings, corners, and trim details, and select the James Hardie plank profile, exposure, and ColorPlus finish that fits the home's style and your preference — lap siding, board and batten, or a mix with trim accents. We also plan for HardieWrap weather barrier and proper flashing details around every window and door.
Old siding comes off, and we inspect the sheathing before anything new goes up. If we find soft spots, rot, or prior water damage, we stop and talk to you before covering it up. Siding installed over a compromised substrate fails early, and we won't do that quietly.
Weather barrier goes on first, then flashing at every penetration, then the James Hardie planks per manufacturer fastening specs — correct nail spacing, proper gaps at butt joints, and caulking only where Hardie's install guide calls for it (not as a substitute for correct flashing). Trim, corners, and caulking finish the job.
We walk the exterior with you, point out details, and address anything before we consider the job complete. You should be able to ask us why any decision was made and get a straight answer.
| Coverage | What It Means |
|---|---|
| James Hardie manufacturer warranty | Covers the product itself — manufacturing defects, and for ColorPlus finishes, coverage against peeling, cracking, and fading per Hardie's published terms. Transferable to future owners. |
| Alpine Exteriors workmanship warranty | Covers our installation — flashing, fastening, and finish work. If something fails due to how we installed it, we come back and fix it. |
| What's not covered | Damage from impact (falling limbs, debris), unrelated roof or gutter failures that route water behind siding, or modifications made by other contractors after our install. |
We'll walk you through the specific warranty terms in writing before any work starts — not buried in fine print you find later.
A full siding replacement on a typical Dupree Lakes single-family home generally runs one to two weeks depending on square footage, trim complexity, and weather. Florida's summer storm season can add delays — we schedule around forecasted rain rather than working through it, since fiber cement installation and flashing work need dry conditions to be done correctly. We'll give you a realistic window up front and keep you posted if weather pushes the schedule.
During the job, expect normal construction noise during work hours, a dumpster or debris trailer on-site, and your yard and landscaping protected around the work area. We clean up daily, not just at the end of the job.
Dupree Lakes sits in the Plant City area of Hillsborough County — inland from the Gulf, so homes here don't deal with direct coastal salt exposure the way properties closer to Tampa Bay do, but they do sit squarely in the path of Florida's summer thunderstorm pattern and the broader hurricane season that runs June through November. Inland communities like this one tend to see less storm surge risk but plenty of straight-line wind, heavy rain events, and the occasional tropical system dropping significant rainfall in a short window. Siding that's properly flashed and fastened matters just as much here as it does closer to the coast — water finds gaps regardless of distance from the beach.
We work throughout Plant City and the surrounding Hillsborough County communities, and we're familiar with the mix of newer subdivisions and established neighborhoods in the Dupree Lakes area — different eras of home construction call for different attention when it comes to what's under the existing siding.
If you're seeing more than one of these, it's worth having someone look before small issues become substrate damage.
Alpine Exteriors holds Florida license RB29003900. That license means we're accountable to the state's licensing board, not just to a customer review page. When you're vetting any siding contractor — us included — ask to see the license number, verify it's active, and confirm it covers the scope of work being quoted. A contractor who's cagey about that is telling you something.
If your home in Dupree Lakes needs new siding or you're planning ahead for it, we're glad to come take a look. Fill out the form below for a free, no-pressure estimate — we'll walk the exterior with you and give you a straight answer about what your home needs.
Ask for the license number directly and verify it on the Florida DBPR (Department of Business and Professional Regulation) website — it takes two minutes and shows you the license status and any complaint history. A legitimate contractor will give you the number without hesitation. Alpine Exteriors' license is RB29003900.
We made a decision to specialize in James Hardie fiber cement because we believe it performs better long-term in this climate, and we'd rather do one product exceptionally well than several products inconsistently. If vinyl is what you want, we're happy to point you toward the material conversation, but we won't quote or install a product outside what we've trained our crews on.
HardiePlank is traditional horizontal lap siding, the most common choice for standard home profiles. HardieShingle mimics a cedar shake look for homes wanting more textured curb appeal, often used as an accent on gables or dormers rather than the whole exterior. We'll help you decide based on your home's architectural style during the consultation.
Being inland means less direct salt air exposure, which is easier on fasteners and finishes over time, but wind and heavy rain from tropical systems still reach Plant City every hurricane season. We install with the same flashing and fastening standards regardless of distance from the coast, since wind-driven rain causes the same water intrusion risk inland as it does near the water.
It varies a lot — if the sheathing is sound, most of the cost is material and labor for the new siding itself. If we find rot or water damage during tear-off, sheathing repair adds cost and time, which is why we quote a range up front and communicate immediately if we find something once the old siding comes off.